Labeling machine technology
Guangzhou Kelang Packaging Special Equipment Co., Ltd. Seiko Quality • Crown Colleagues Switchboard: 020-34853631 (20 lines)
Consulting: 13942184910 [Mr. Fu]
13570906509 [Mr. Liu]
Address: 3 / F, Building 18, Lianwang Industrial Zone, Wenbian Village, Shiji Town, Panyu District, Guangzhou City
The labeling machine equipment will inevitably encounter some difficulties when using it. It is necessary to learn a little about the maintenance of the labeling machine equipment. Let us understand some of the maintenance knowledge of the labeling machine:
1. When adjusting the star wheel for entering and exiting the bottle and the screw rod for entering the bottle, the bottle head of the standard machine shall prevail. First adjust the bottle entry star wheel. When the bottle pressing head just overwhelms the bottle, adjust the bottle entry star wheel so that the bottle is located in the middle of the star wheel groove. Adjusting the screw rod for bottle feeding: The bottle feeding star wheel shall prevail. When the bottle is located in the middle of the groove of the bottle feeding star wheel, adjust the screw rod so that the bottle feeding side of the screw rod is close to the bottle without displacement. Adjusting the star wheel out of the bottle: When the bottle pressing head is just raised, adjust the star wheel so that the bottle is located in the middle of the groove of the star wheel.
2. There is a clear gap between the rubber scraper and the rubber roller. For this fault, we can adjust the rubber scraper by adjusting the eccentric bolt. The gap is too large, and there is too much glue on the target plate, which causes the glue to fling. The gap is too small and the contact is too tight, it will squeeze the glue away, and there is no glue on the half of the target.
The above is the analysis of Guangzhou Krone Packaging Special Equipment Co., Ltd. Thank you for your attention