First, the basic purpose of protective film labeling machine
It is specially used for labeling various kinds of cards. The protective film is applied on the surface of various plastic sheets with high accuracy and no bubbles in the film. Application scope of protective film labeling machine
a. Applicable labels: self-adhesive labels, self-adhesive films, electronic supervision codes, barcodes, etc. b. Applicable products: Products that require labels or films to be affixed on flat or large arc surfaces. c. Application industry: Widely used in electronics, hardware, plastic, chemical and other industries.
d. Application examples: cardboard labeling, acrylic film, large plastic film, ceramic film, etc. Working process of protective film labeling machine
＊ Core working principle: The sensor detects the passing of the product and returns a signal to the labeling control system.
When the position control system controls the motor to send out the label and attach it to the product to be labeled, the product flows through the labeling roller, the label is rolled, and the labeling operation is completed.
＊ Operation process: put products—> products are separated and transported (automatic equipment realization) —> labeling (automatic equipment realization) —> collect labeled products (automatic equipment realization) —> remove products.
Fourth, the technical parameters of the protective film labeling machine: (the following are the standard model technical parameters, other special requirements and functions, can be customized).
a. Applicable label length (mm): 6mm to 250mm b. Applicable label length (mm): 6mm to 250mm
c. Applicable product size (length × width × height / thickness): length: 40mm ～ 280mm
Width: 40mm ～ 200mm Height: 0.2mm ～ 2mm
d. Applicable label roll outer diameter (mm): φ280mm e. Applicable label roll outer diameter (mm): φ76mm f. Labeling accuracy (mm): ± 1mm
g, labeling speed (m / min): step 19m / min servo 25m / min h, labeling speed (pcs / min): step: 40 ～ 150pcs / min
Servo: 50 ～ 200pcs / min i, conveying speed (m / min): step: 5 ～ 19m / min
Servo: 5 ～ 25m / min Speed regulating motor: 5 ～ 16m / min
j, weight (kg): about 180kg k, frequency (HZ): 50HZ l, voltage (V): 220V
m. Power (W): Transmission speed regulation + traction step: 500W Transmission speed regulation + traction servo: 950W Frequency conversion + traction step: 780W Frequency conversion + traction servo: 1170W
n. Overall dimensions of the equipment (mm) (length × width × height): 2200mm × 700mm × 1400mm V. Features of protective film labeling machine
a, stable card, using advanced sorting-reverse dial technology to split the card, the card sorting rate is much higher than ordinary card-splitting agencies;
b. The speed of labeling is high, and the stable speed can reach more than 200 pieces per minute according to the supervision code of the medicine box. c. It has a wide range of applications, which can be used to label various cards and paper items, and is suitable for unfolded paper Box labeling
d. The labeling accuracy is stable. The pressing roller is used to press the workpiece, the conveying is stable, and it can not be warped, and the labeling accuracy is guaranteed;
e. The structured combination of mechanical adjustment part and the clever design of label winding, 6 degrees of freedom of labeling position are easy to fine-tune, which makes the conversion between different products and label winding easy and time-saving;
f. Intelligent control, automatic photoelectric tracking, with functions of no labeling, automatic calibration without label and automatic detection of labels to prevent missing labels and waste of labels;
g, high stability, Panasonic PLC + Panasonic touch screen + Panasonic needle electric eye + German Leuze label electric eye advanced electrical control system, support equipment 7 × 24 hours of operation;
h. With fault alarm function, production counting function, power saving function, production number setting prompt function, parameter setting protection function.