⎝⎛星力捕鱼⎞⎠

克朗机械,12年贴标研发厂家,精工品质,冠领同行。电话热线:13924184910,02034853631。

Contact Krone

联系克朗

Guangzhou Kelang Packaging Special Equipment Co., Ltd. Seiko Quality • Crown Colleagues Switchboard: 020-34853631 (20 lines)
Fax: 020-34854076
Consulting: 13942184910 [Mr. Fu]
13570906509 [Mr. Liu]
Website: zbigm.com
Email: 584137379@qq.com
Address: 3 / F, Building 18, Lianwang Industrial Zone, Wenbian Village, Shiji Town, Panyu District, Guangzhou City

Labeling machine continuously ejects labels and stops out of control

Source: This site Popularity: Release time: 2014-12-04 12:01:00

  • 1, most of the detection of the electric eye is not set up, reset the electric eye can solve.
    2. The electric eye is not suitable for the detected label, and the applicable electric eye needs to be replaced.
    3. The electric eye is damaged and needs to be replaced.
    4. Press the foot switch multiple times to complete the labeling once. The reason is that the sensor's electric eye signal interferes with the label. Reset the electric eye.
    5. Make sure the label passes through the sensor slot of the electric eye.
Previous: The label on the labeling machine cannot be labeled and cannot be labeled
Next post: The label backing paper of the labeling machine often breaks
online service
七乐彩 欢乐拼三张 星力捕鱼 欢乐拼三张